This system is a twin bottle universal nitrous kit.
Checkout the twin bottle busa video DynoTune Hayabusa twin bottle kit video
This DynoTune dry Motorcycle nitrous oxide system will add up
to an additional 80HP to your Ride. Comes with eveything you need for a complete
installation. This Dry kit uses your bikes EFI sensors to add the additional
fuel needed to make the Power! By passing the cool nitrous charge past the Air
Temperature sensor in the intake track, we can fool the bikes EFI system into
adding the little extra fuel you need to make some sweet power! Note: Consult
your factory manual to make sure you have a "Air Temperature" sensor in your
intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of
15HP, 30HP, and 40HP.
TL1000R shown above
ZX-14 kit comes with custom bracket adaptors as shown
Checkout the twin bottle video
for the ZX-14 here>> DynoTune twin bottle ZX-14 kit video
How do the bottles mount and get filled? Watch the Video
here>> "Mounting and Refilling"
twist on to mount so changing bottles is a ten second process, great for the
race track! Custom painted bottles will no longer be scratched!
The Motorcycle nitrous oxide system Comes complete with
instructions on how to use your Horn or starter for nitrous activation making it
a clean installation.
The Twin inlet system allows the user to configure the inlet
any way they want. Single or dual snorkel intakes, its all in the kit! High
Heat/Pressure teflon tubing inculded.
Note: In the Video, The Purge kit,
V nozzle and braided line from purge solenoid are optional.
fabrication and mounting screws/hardware is required to mount the billet bottle
brackets. The frame or rear foot pegs are the best location. If upgrading to the
20oz bottles make sure you have room for the bottles as they are larger than the
The Base motorcycle nitrous oxide kit includes
-- 2 12oz black powder coated Nitrous Bottles
-- 2 Billet bottle mounting brackets
-- 2 two foot stainless bradied nitrous lines
-- 2 Nozzles with
-- High flow Nitrous Solenoid
-- Three nitrous jets
-- Electrical kit with switch, terminals etc.
-- High Pressure
teflon tubing and compression fittings.
-- Nitrous bottle fill adaptor.
Bottles simply twist off in seconds for the ulitmate in quick filling.
The following options are available:
bottles:Measure to make sure they will fit your application as the bottles are
large! 11.5" long x 3.25" dia.
-- Diffrent color brackets now
-- Purge kit with "V"nozzle, solenoid and two foot Braided
This Nitrous oxide kit will work on any efi mototcycle.
ATTENTION!!! NOTE: Old style bracket shown above. All the new
brackets shown below
will have the larger round knobs. The knobs are much easier to turn, will
not come off, and the brackets are thicker and stronger than ever! It comes with
a Gauge port built into the side of the bracket (1/8" NPT threads) plus the
standard outlet fitting on the opposite side. (Gauge sold separate) All new kits
will come with this style bracket(s).